EN 295-4-1995+AC-1998

排水管和下水道用陶瓷粘土管和管配件及管接头 第4部分：专用配件、管接头和配套附件的要求

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adaptors and compatible accessories

EN 681-2-2000+A1-2002

弹性密封件 供水和排水管道用管联接密封件的材料要求 第2部分：热塑性合成橡胶

Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers

EN 681-4-2000+A1-2002

弹性密封件 供水和排水管道用管联接密封件的材料要求 第4部分：浇铸聚氨酯密封元件

Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements

EN 681-3-2000+A1-2002

弹性密封件 供水和排水管道用管联接密封件的材料要求 第3部分：硫化橡胶的泡沫材料

Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber

EN 681-1-1996+A1-1998+A2-2002+AC-2002

弹性密封件 供水和排水管道用管联接密封件的材料要求 第1部分：琉化橡胶

Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber

EN 1852-1-1997+A1-2001

无压地下排水和污水用塑料管道系统 聚丙烯(PP)、 第一部分：管材、管件及系统规范

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system

EN 13036-3-2002

道路和机场地面特性 试验方法 第3部分：路面水平排水能力测定

Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability

EN 13508-2-2003

建筑物外排水和污下管系统状况的确定 第2部分：目测和编码系统

Conditions of drain and sewer systems outside buildings - Part 2: Visuel inspection coding system

EN 13598-1-2003

非压力底下排水和污水塑料管道系统 非增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE） 第1部分：包括

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers

EN 60335-2-83-2002

家用和类似用途电器　安全 第2-83部分： 屋顶排水用加热式排水道的特殊要求　

Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage (IEC 60335-2-83:2001) / Note: Endorsement notice

prEN 13508-1-2003

建筑物外排水和污水管系统状况的确定 第1部分：一般要求

Condition of drain and sewer systems outside buildings - Part 1: General requirements

prEN 13476-1-2002

非压力地下排水和污水热塑性塑料管道系统 聚氯乙烯（PVC-U）、聚丙烯（PP）)和聚已烯（PE）的结构墙管道系

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for pipes, fittings and the syste

prEN 1253-5-2003

建筑物排水装置 第5部分：封闭的轻流体排水装置要求和试验方法

Gullies for buildings - Part 5: Gullies with light liquids closure

EN ISO 15083-2003

小艇　舱底排水泵送系统

Small craft - Bilge pumping systems (ISO 15083:2003)

SY/T 0089-2006

油气厂、站、库给水排水设计规范

Code for design of water and wastewater for oil/gas plant ,station and depot

prEN 12897-2003

供水 间接加热无排水口（封闭）热水贮存系统规范

Water supply - Specification for indirectly heated unvented (closed) storage water heaters

JC/T 613-2005

混凝土和钢筋混凝土排水管钢模

JC/T 946-2005

混凝土和钢筋混凝土排水管用橡胶密封圈

DL/T 938-2005

火电厂排水水质分析方法

SY/T 4088-1995

滩海石油工程给水排水技术规范

prEN 14364-2002

有或无压排水和排污塑料管线系统 玻璃纤维增强的未饱和的聚酯树脂基热固塑料管 塑料管管件及接头规范

Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints

UL 1726-2001

储水系统用自动排水阀

(Automatic drain valves for standpipe systems )

QB/T 2482-2000

直流排水电磁铁

MT/T 1002-2006

煤矿在用主排水系统节能监测方法和判定规则

HG/T 20572-2007

化工企业给排水设计施工图内容深度统一规定