|
prEN 1115-7-1995 |
压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料（GRP） 第7部分：一致 |
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 7: Assessment of conformity |
|
prEN 1115-2-1997 |
压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料（GRP） 第2部分：具挠 |
Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
|
prEN 1636-4-1994 |
无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第4部分：辅助设备 |
Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 4: Ancillary equipment |
|
prEN ISO 15749-4-2001 |
船舶和造船技术 船和海上构筑物上排水系统 第4部分：生活污水排水、污物处理排出管道 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO/DIS 15749-4:2001) |
|
prEN ISO 15749-3-2001 |
船舶和造船技术 船和海上构筑物上排水系统 第3部分：生活污水排水、排水管的真空抽吸系统 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system (ISO/DIS 15749-3:2001) |
|
prEN ISO 15749-5-2001 |
船舶和造船技术 船和海上构筑物上排水系统 第5部分：甲板、货仓及游泳池的排水 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo holds and swimmming pools (ISO/DIS 15749-5:2001) |
|
EN 1437-2002 |
塑料管道系统 地下排水和污水用管道系统 耐温度循环和外部负荷综合作用的试验方法 |
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
|
EN 1433-2002 |
车辆和人行区域的排水渠道分类、设计和试验要求 标志和符合性评估 |
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
|
EN 12380-2002 |
排水系统用进气阀 要求、试验方法和合格评定 |
Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity |
|
EN 13244-1-2002 |
地上和地下给排水和污水压力系统用塑料管道 聚已烯（PE） 第1部分：总则 |
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General |
|
EN 13244-2-2002 |
地上和地下给排水和污水压力系统用塑料管道 聚已烯（PE） 第2部分：管道 |
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes |
|
EN 13244-4-2002 |
地上和地下给排水和污水压力系统用塑料管道 聚已烯（PE） 第4部分：阀门 |
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves |
|
EN 13244-5-2002 |
地上和地下给排水和污水压力系统用塑料管道 聚已烯（PE） 第5部分：系统适用度 |
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
|
EN 13244-3-2002 |
地上和地下给排水和污水压力系统用塑料管道 聚已烯（PE） 第3部分：配件 |
Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings |
|
EN 13566-1-2002 |
用于修复非压力排水和污水网的塑料管道系统 第1部分：总则 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
|
EN 13566-3-2002 |
用于修复非压力排水和污水网的塑料管道系统 第3部分：带密装配管的衬套 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes |
|
EN 13566-4-2002 |
用于修复非压力排水和污水网的塑料管道系统 第4部分：带现场固化管的衬套 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes |
|
EN 13905-2003 |
卫生座便器用低阻力喷射排水软管 |
Low resistance shower hoses for sanitary tapware |
|
EN 13904-2003 |
卫生座便器用低阻力喷射排水口 |
Low resistance shower outlets for sanitary tapware |
|
EN 13973-2002 |
刚性塑料容器 排水能力的测定方法 |
Rigid plastics containers - Method for determination of drainability |
|
EN 1253-1-2003 |
建筑物排水装置 第1部分：要求 |
Gullies for buildings - Part 1: Requirements |
|
EN 295-1-1991+AA1-1996+A2-1996+A3-1999 |
排水管和下水道用陶瓷粘土管和管配件及管接头 第1部分：要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers; part 1: requirements |
|
EN 295-5-1994+A1-1999 |
排水管和下水道用陶瓷粘土管和管配件及管接头 第5部分：带孔的陶瓷粘土管及配件的要求 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated virtrified clay pipes and fittings |
|
EN 295-2-1991+A1-1999 |
排水管和下水道用陶瓷粘土管和管配件及管接头 第2部分：质量控制和取样 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers; part 2: quality control and sampling |
|
EN 295-3-1991+A1-1998 |
排水管和下水道用陶瓷粘土管和管配件及管接头 第3部分：试验方法 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers; part 3: test methods |
来点掌声
扔个鸡蛋
