ENV 1852-2-2000

无压地下排水和污水用塑料管道系统 聚丙烯(PP) 第2部分：合格评定指南

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity

EN 1636-5-1997

无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第5部分：针对接头

Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints

EN 1115-3-1996

压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料（GRP） 第3部分：配件

Plastics piping systems for underground drainage and sewerage under pressure - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings

EN 1636-3-1997

无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第3部分：管件

Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings

EN 588-1-1996

污水管和排水管用纤维水泥管 第1部分：重力系统用管道、管连接件和管配件

Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems

EN ISO 3994-2000

塑料软管　给排水用螺纹型热塑性软管　规范

Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998)

EN 27842-1991

自动蒸汽疏水阀门 排水量的测定

Automatic steam traps- Determination of discharge capacity- Test methods (ISO 7842:1988)

EN 752-6-1998

室外建筑物的排水系统 第6部分：泵送装置

Drain and sewer systems outside buildings - Part 6: Pumping installations

prEN 14055-1-2000

公厕冲洗池　第1部分：带内溢流和阀门排水口装置的冲洗池

WC flushing cisterns - Part 1: Flushing cisterns with internal overflow and valve outlet mechanism

prEN 13566-2-2002

用于修复非压力排水和污水网的塑料管道系统 第2部分：带连续管的衬套

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes

prEN 60745-2-21-2001

手持式电动工具的安全　第２－２１部分：排水沟清理机的特殊要求　草案

IEC 60745-2-21, Ed. 1.0: Safety of hand-held motor-operated electric tools - Part 2-21: Particular requirements for drain cleaners

prEN 295-10-2001

排水管和下水道用陶瓷粘土管和管配件及管接头 第10部分：强制要求

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Mandated requirements

prEN 12666-1-2001

非压力地下排水和排污用塑料管道系统　聚乙烯（PE）.第1部分：管道、配件和系统规范

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system

prEN 12056-6-1995

建筑物内的重力排水系统　第6部分：检验与测试

Gravity drainage systems inside buildings - Part 6: Inspection and testing

EN ISO 11812-2001

小艇　密水舱和快速排水舱

Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001)

EN 13252-2000

土木织物及相关产品 用于排水系统的必要特性

Geotextiles and geotextile-related products - Characteristics required for use in drainage systems

prEN ISO 15749-2-2001

船舶和造船技术　船和海上构筑物上排水系统　第2部分：生活污水排水、排水管道的自流系统

Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system (ISO/DIS 15749-2:2001)

prEN ISO 15749-1-2001

船舶和造船技术　船和海上构筑物上排水系统　第1部分：生活污水排水系统的设计

Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design (ISO/DIS 15749-1:2001)

EN 124-1994

车辆和行人通过区域的排水沟盖和检修孔盖 设计要求、型式试验、标志、质量控制

Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control

EN 124/prA1-2001

车辆和行人通过区域的排水沟盖和检修孔盖 设计要求、型式试验、标志、质量控制 修改A1

Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, testing, marking, quality control; Amendment A1

EN 12056-3-2000

建筑物内的重力排水系统　第3部分：屋面排水的布局和计算

Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation

prEN 1852-5-1995

无压地下排水和污水用塑料管道系统 聚炳烯(PP) 第5部分：对系统配合的适宜性

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 5: Fitness for purpose of the system

EN 1253-2-1998

建筑物排水装置 第2部分：试验方法

Gullies for buildings - Part 2: Test methods

EN 1253-3-1999

建筑物排水装置 第3部分：质量控制

Gullies for buildings - Part 3: Quality control

EN 12056-5-2000

建筑物内的重力排水系统　第5部分：安装与试验的操作说明、维护与使用

Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and use