NF T47-305-1/A2-2003

弹性密封件.给水排水用管道连接密封件的材料要求.第1部分:硫化橡胶

(Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 1 : vulcanized rubber.)

NF P16-364-4-2003

地下非压力排水和污水网用塑料管道系统.第4部分:现场固化管用的管衬

(Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes.)

NF P16-104-2001

外部建筑排水和污水系统翻新和修理用构件的一般要求

(General requirements for components used for renovation and repair of drain and sewer systems outside buildings.)

NF P94-074-1994

土壤:调查与试验.用三轴试验仪器测剪切强度试验.仪器.试验标本的制备.松散的、不排水的(UU)试验.带有孔隙压

()

NF S91-313-1997

牙科设备.给排水管接头

(Dental equipment. Connections for supply and waste lines.)

NF P16-150-6-1998

建筑物外部排水和污水系统.第6部分:泵设备

(Drain and sewer systems outside buildings. Part 6 : pumping installations.)

NF T47-305-4-2000

弹性密封件.水和排水设施用管接头密封件材料的要求.第4部分:铸造聚氨基甲酸乙酯密封元件

(Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4 : cast polyurethane sealing elements.)

NF T54-903-1996

塑料管道系统.建筑物内排水管用热塑制管道系统.可载温度负荷的检验方法

(Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling.)

NF J42-110-1952

造船工业.内部排水.液压排水器

(SHIPBUILDING. INTERNAL SCUPPERS. HYDRAULIC SCUPPERS.)

NF T47-305-2-2000

弹性密封件.水和排水设施用管接头密封件材料的要求.第2部分:热塑性弹性材料

(Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2 : thermoplastic elastomers.)

NF P41-220/A1-1999

DTU 60.2.建筑工程.土壤水,雨水,废水排水铸铁管道的技术规范

(DTU 60.2 - Building works - Cast ison pipes for soil water, rain water and waste water drainage - Technical specification.)

NF J42-105-1952

造船工业.内部排水.简单排水器

(SHIPBUILDING. INTERNAL SCUPPERS. SINGLE SCUPPERS.)

NF Q50-003-2000

纸浆.排水能力的测定.第1部分:SCHPPER-RIEGLER法

(Pulps - Determination of drainability - Part 1 : Schopper-Riegler method.)

NF P41-213/A1-2000

DTU 60.33.建筑工程.非塑化聚氯乙烯管道安装.废水排水管.技术规范

(DTU 60.33 - Building works - Unplasticized polyvinyl chloride piping installations - Waste water drainage - Technical specifications.)

NF P41-220/A2-2000

DTU 60.2.建筑工程.土壤水,雨水,废水排水铸铁管道的技术规范

(DTU 60.2 - Building works - Cast iron for soil water, rain water and waste water drainage - Technical specifications.)

NF T47-305-3-2000

弹性密封件.水和排水设施用管接头密封件材料的要求.第3部分:硫化橡胶泡沫材料

(Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3 : cellular material of vulcanized rubber.)

NF P16-341-1990

排水.无压力排水管路用钢筋混凝土和非钢筋混凝土制圆管.定义、规范、试验方法、标记、验收条件

(Drainage, sewerage. Precast concrete cylindrical pipes, steel reinforced or not reinforced for sewerage networks without pressure. Definitions, specifications, testing methods, marking, basis for acceptance.)

NF P98-302-1982

路面.混凝土路边石和预制排水沟

(Concrete kerb stones and gulleys.)

NF P16-210-1999

建筑物中的真空排水系统

(VACUUM DRAINAGE SYSTEMS INSIDE BUILDINGS. (EUROPEAN STANDARD EN 12109).)

NF T54-300-3-2003

普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第3部分:管件

(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.)

NF P37-408-1947

屋顶附件.巴黎框“式焊接或铆接板制屋顶排水框架.术语.尺寸

(ROOF SKYLIGHT RACK-MOUNTED WITH DRIP MOULDING KNOWN IN FRANCE AS “PARISIAN-TYPE“ OF WELDED OR RIVETED STEEL. TERMINOLY. DIMENSIONS.)

NF P16-250-2-2000

建筑物内的重力排水系统.第2部分:卫生管道,布局和计算

(Gravity drainage systems inside buildings - Part 2 : sanitary pipework, layout and calculation.)

NF P16-250-4-2000

建筑物内的重力排水系统.第4部分:废水提升工厂.布局和计算

(Gravity drainage systems inside buildings - Part 4 : wastewater lifting plants - Layout and calculation.)

NF P98-254-4-1995

路面试验.渗水路面的表层浅水特性.第4部分:连续荷载渗漏器表面排水量的测定

(TESTS RELATING TO PAVEMENTS. SURFACE DRAINAGE PROPERTIES ON PERVIOUS PAVEMENTS. PART 4 : MEASUREMENT OF SURFACE FLOW ON DRAINING FLOORING WITH A CONSTANT LOADING PERMEATER.)

NF P98-217-1-1995

路面试验.宏观结构测定.第1部分:地面排水能力测量

(TESTS RELATING TO PAVEMENTS. TESTS RELATING TO MACROTEXTURE. PART 1 : MEASUREMENT OF THE SURFACE DRAINAGE CAPACITY.)