NF P16-361-6-1997

无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第6部分:安装实施规程

(Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 6 : practices for installation.)

NF P16-361-3-1997

无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第3部分:配件

(Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 3 : fittings.)

NF T54-300-2-2003

普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第2部分:管道

(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.)

NF A48-720-1999

建筑物排水用铸铁管和配件及其接头和附件.要求、试验方法和质量保证

(Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance.)

NF T54-300-4-2003

普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第4部分:阀门

(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.)

NF P16-361-5-1997

无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第5部分:接头的适用性

(Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.)

NF T57-214-5-1996

压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第5部分:接头的适用性

(Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.)

NF P16-340-2003

车辆和行人区的排水通道.分类、设计、试验要求、标记和合格评定

(Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity.)

NF T47-305-3/A1-2003

弹性密封件.给水排水用管道连接密封件的材料要求.第3部分:硫化橡胶多孔材料

(Elastomeric seals - Material requirements for joint seals used in water and drainage applications - Part 3 : cellular materials of vulcanized rubber.)

NF P16-101-1999

用于液压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN773)

(General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers.)

NF P16-103-1999

用于气压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN1293)

(General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers.)

NF T47-305-1-1996

弹性密封.排水设施用管接头密封用材料的要求.第1部分:硫化橡胶

(Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications. Part 1 : vulcanized rubber.)

NF P16-250-3-2000

建筑物内的重力排水系统.第3部分:屋顶管道,布局和计算

(Gravity drainage systems inside buildings - Part 3 : roof drainage, layout and calculation.)

NF P16-250-1-2000

建筑物内的重力排水系统.第1部分:一般和性能要求

(Gravity drainage systems inside buildings - Part 1: general and performance requirements.)

NF P16-250-5-2000

建筑物内的重力排水系统.第5部分:安装和试验.操作维护和使用指南

(Gravity drainage systems inside buildings - Part 5 : installation and testing, instructions for operation, maintenance and use.)

NF P16-321-2-1992

管、陶土配件及上水与排水管的安装.第2部分:质量监督和采样(EN 295-2)

(Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 2 : quality control and sampling.)

NF T54-300-5-2003

普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第5部分:系统的适用性

(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)

NF P16-126-2000

非挖沟结构和管道及排水管的试验

(Trenchless construction and testing of drains and sewers.)

NF P16-357-1/A1-2002

无压地下排水系统用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统的规范

(Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.)

NF P16-360-2002

塑料管道系统.无压地下排水系统用管道系统.耐热循环和外部负载的试验方法

(Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.)

NF P16-321-5-1994

排水及污水用陶土管道,配件和管接头.第5部分:多孔陶土管道和配件的要求(EN 295-5)

(Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 5 : requirements for perforated vitrified clay pipes and fittings.)

NF P98-831-3-2003

道路和机场表面特征.试验方法.第3部分:路面表层水平排水能力的测量

(Road and airfield surface characteristics - Test methods - Part 3 : measurement of pavement surface horizontal drainability.)

NF T54-300-1-2003

普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第1部分:总则

(Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1 : general.)

NF T47-305-4/A1-2003

弹性密封件.给水排水用管道连接密封件的材料要求.第4部分:聚氨酯密封铸件

(Elastomeric seals - Material requirements for pipe joint seals in water and drainage applications - Part 4 : cast polyurethane sealing elements.)

NF P16-220-2003

排水系统用通气阀.要求、试验方法和合格评定

(Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity.)