百科首页 >> 给水排水 >> 行业标准

给水国家标准编号 6
http://www.sunsecond.com  2008-5-5 11:44:07 第二太阳百科

标准编号 标准中文名称 标准英文名称
SH/T 3124-2001
石油化工给水排水工艺流程设计图例
GB/T 12772-1999
排水用柔性接口铸铁管及管件
Cast iron pipes and fittings with flexible joint sewerage
GB/T 16662-1996
建筑给水排水设备器材术语
Terms of equipments and materials for building water supply and drainage
GB/T 16800-1997
排水用芯层发泡硬聚氯乙烯(PVC-U)管材
Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage and sewerage systems
GB/T 18024.7-2000
煤矿机械技术文件用图形符号压气、通风及排水机械图形符号
Graphical symbols for use in technical documentation of coal mine machinery--Graphical symbols for machinery of compressed-air,ventilation and water drainage
GB/T 19647-2005
农田排水用塑料单壁波纹管
Single wall corrugated plastics pipes for agricultural drainage
GB/T 19837-2005
城市给排水紫外线消毒设备
Ultraviolet(UV) disinfection equipment for municipal water and wastewater treatment
GB/T 4549.8-2004
铁道车辆词汇第8部分:给水、排水装置
Railway vehicle vocabulary--Part8:Water supply and draining equipment
GB/T 16752-2006
混凝土和钢筋混凝土排水管试验方法
Test methods of concrete and reinforced concrete drainage and sewer pipes
GB/T 5836.1-2006
建筑排水用硬聚氯乙烯(PVC-U)管材
Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings
GB/T 5836.2-2006
建筑排水用硬聚氯乙烯(PVC-U)管件
Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and waste inside buildings
GB/T 20221-2006
无压埋地排污、排水用硬聚氯乙烯(PVC-U)管材
Unplasticized poly(vinyl chloride)(PVC-U) pipes for non-pressure buried drainage and sewerage systems
SY/T 4035-1993
石油建设工程质量检验评定标准 采暖、通风、给排水安装工程
EN 12056-1-2000
建筑物内的重力排水系统 第1部分:一般性能要求
Gravity drainage systems inside buildings - Part 1: General and performance requirements
DL/T 5143-2002
变电所给水排水设计规程
JC/T 932-2003
卫生洁具排水配件
JC/T 923-2003
混凝土低压排水管
HG/T 22805.10-1993
化工矿山企业施工图设计内容和深度的规定——给排水专业
SY/T 89-1996
油气厂、站、库给排水设计规范
SY/T 6124-1995
气举排水采气工艺作法
SY/T 5761-1995
排水采气用起泡剂CT5-2
NF T57-214-3-1996
压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第3部分:配件
(Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsaturated polyester resin (up). Part 3 : fittings.)
NF P16-357-1-1997
无压地下排水系统用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统的规范
(Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 1 : specifications for pipes, fittings and the system.)
NF G38-184-2001
土工织物及相关产品.排水系统中使用的特征要求
(Geotextiles and geotextile-related products - Characteristics required for use in drainage systems.)
NF P16-364-3-2003
地下非压力排水和污水管网更新用塑料管道系统.第3部分:紧配合管用衬层
(Plastics piping systems for renovation of underground non-pressure drainage and sewerage network - Part 3 : lining with close-fit pipes.)

标签:
参考资料:
·



关于本词条评论:点击查看

对本词条发布评论


(最多不超过500字)